How to Install a Door Knob

Installing a door knob is a simple task that can be completed with a few basic tools and some patience. Follow these steps to install a door knob:

Step 1: Remove the Old Door Knob
Use a screwdriver to remove the screws holding the old door knob in place. Once the screws are removed, the door knob should come off easily. If the knob is stuck, use a flathead screwdriver to gently pry it off the door.

Step 2: Remove the Latch Plate
The latch plate is the metal plate that fits into the door jamb and keeps the door closed. Use a screwdriver to remove the screws holding the latch plate in place. Once the screws are removed, the latch plate should come off easily.

Step 3: Install the New Latch Plate
Insert the new latch plate into the hole in the door jamb. Make sure the plate is flush with the jamb and use a screwdriver to secure it in place with the screws provided.

Step 4: Insert the New Door Knob
Insert the new door knob into the hole in the door. Make sure the latch mechanism lines up with the hole in the latch plate. Push the two halves of the door knob together until they click into place.

Step 5: Secure the Door Knob
Use a screwdriver to secure the door knob in place with the screws provided. Make sure the screws are tight, but be careful not to over-tighten them as this can damage the door or the knob.

Step 6: Test the Door Knob
Test the door knob to make sure it is working properly. Turn the knob to open and close the door. Make sure the latch is properly engaged and the door closes securely.

Congratulations, you have successfully installed a door knob!